Diagram 604/39 (Tracks 519-532)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver Seat Lumbar Support Adjustment Switch

E464 - Driver Memory Settings Control Head

E470 - Driver Seat Adjustment Control Head

G438 - Front Seat Height Adjustment Position Sensor

G439 - Rear Seat Height Adjustment Position Sensor

G441 - Seat Fore/Aft Adjustment Position Sensor

J136 - Memory Seat/Steering Column Adjustment Control Module

J519 - Vehicle Electrical System Control Module Locations

T6y - 6-Pin Connector

T6ah - 6-Pin Connector

T6az - 6-Pin Connector

T10g - 10-Pin Connector

T26b - 26-Pin Connector

(M41) - Connection 1 (in driver's seat wiring harness)


- Location: for power seats: In driver's seat wiring harness between wiring circuits for J136 - Memory Seat/Steering Column Adjustment Control Module


- Location: for mechanical seats: In driver's seat wiring harness between wiring circuits for E24 - Driver's Safety Belt Switch and J774 -Front Heated Seats Control Module

(M42) - Connection 2 (in driver's seat wiring harness)


- Location: In driver's seat wiring harness between wiring circuits for E176 - Driver's Seat Lumbar Support Adjustment Switch and E464 - Driver's Memory Settings Control Head

1) - Through June 2007

Previous Diagram 604/38 (Tracks 505-518)

Next Diagram 604/40 (Tracks 533-546)