Diagram 65/38 (Tracks 505-518)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J519 - Vehicle Electrical System Control Module Locations Locations

N30 - Cylinder 1 Fuel Injector Locations

N31 - Cylinder 2 Fuel Injector Locations

N32 - Cylinder 3 Fuel Injector Locations

N33 - Cylinder 4 Fuel Injector Locations

N75 - Wastegate Bypass Regulator Valve 2.0L BPY, CCTA and CBFA

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve Locations

N83 - Cylinder 5 Fuel Injector Locations

N205 - Camshaft Adjustment Valve 1 Locations

N249 - Turbocharger Recirculating Valve 2.0L BPY, CCTA and CBFA

SB9 - Fuse 9 (on fuse panel B)

SC30 - Fuse 30 (on fuse panel C) Locations

T14a - 14-Pin Connector

T26 - 26-Pin Connector

(D136) - Plus Connection 2 (15a (in engine compartment wiring harness) Location: In engine wiring harness between wiring circuits for N32 - Cylinder 3 Fuel Injector and N33 - Cylinder 4 Fuel Injector

(D181) - Connection 2 (87a) (in engine wiring harness) Location in vehicle 2,0 L: Location: In main wiring harness between wiring circuits for G62 - Engine Coolant Temperature (ECT) Sensor and T14a connection, in engine compartment wiring harness Location in vehicle 2,5 L: Location: In main wiring harness between wiring circuits for G71 - Manifold Absolute Pressure (MAP) Sensor and N205 - Camshaft Adjustment Valve 1

(*) - Engine code BPY, only

Previous Diagram 65/37 (Tracks 491-504)

Next Diagram 65/39 (Tracks 519-532)