Traction Control Switch: Service and Repair

ASR/ESP Button

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Carefully pry off shift boot from center console - arrows -.





- Remove screws - arrows -.





- Remove installation frame with ashtray from center console.

- Disconnect connectors - arrows -.





- Disengage the retaining tabs - arrows - and remove the ASR/ESP Button (E256) from the installation frame.





Installing

Install in reverse order of removal.