Dimmer Switch: Service and Repair

Instrument Panel Lamps and Switches

Instrument Panel Illumination Dimmer Switch

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Remove the Light Switch (E1). Refer to --> [ Light Switch ].

- Remove the driver's side storage compartment.

- Disconnect electrical connection - arrow -.





- Release the retaining tabs - arrows - and remove the Instrument Panel Illumination Dimmer Switch (E20).





Installing

Install in reverse order of removal.