Exterior Rearview Mirror Adjusting Unit

Exterior Rearview Mirror Adjusting Unit

• Removing and installing is described only for the left adjusting unit with motor. Removing and installing right adjusting unit with motor is derived accordingly from this.

Removing

- Remove mirror glass. Refer to => [ Mirror Glass ] Mirror Glass.





- Remove bolts - 1 -.

- Remove adjusting unit with motor - 2 - and disconnect harness connector.

Installing

Installation is performed in the reverse order of removal.

Tightening torque of bolts for adjusting unit with motor: 1 Nm

- Perform a function test.