Diagram 150/34 (Tracks 449-462)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated Oxygen Sensor (HO2S) Locations

G108 - Heated Oxygen Sensor (HO2S) 2 Locations

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

G465 - Oxygen Sensor (O2S (in Center Three Way Catalytic Converter (TWC), Bank 1 Locations

J519 - Vehicle Electrical System Control Module Locations Locations

SB15 - Fuse 15 (on fuse panel B)

SB21 - Fuse 21 (on fuse panel B)

T4v - 4-Pin Connector

T4ao - 4-Pin Connector

T6w - 6-Pin Connector

T6af - 6-Pin Connector

T40 - 40-Pin Connector

(E30) - Connection (87a) (in engine wiring harness)


- Location: in vehicle 2,5 L: In main wiring harness between wiring circuits for J623 - Engine Control Module (ECM) and G465 - Oxygen Sensor (O2S (in Center Three Way Catalytic Converter (TWC), Bank 1


- Location: in vehicle 2,0 L Diesel: In main wiring harness between wiring circuits for F - Brake Light Switch and G476- Clutch Position Sensor


- Location: in vehicle 2,0 L: In wiring circuit between main harness and E-Box

Previous Diagram 150/33 (Tracks 435-448)

Next Diagram 150/35 (Tracks 463-476)