Diagram 150/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G - Fuel Level Sensor Locations

G6 - Transfer Fuel Pump (FP) Locations

G34 - Left Front Brake Pad Wear Sensor Locations

J17 - Fuel Pump (FP) Relay Locations

J285 - Instrument Cluster Control Module Locations Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J643 - Fuel Primer Relay

N30 - Cylinder 1 Fuel Injector Locations

N31 - Cylinder 2 Fuel Injector Locations

N32 - Cylinder 3 Fuel Injector Locations

N33 - Cylinder 4 Fuel Injector Locations

N83 - Cylinder 5 Fuel Injector Locations

T2y - Double Connector

T5b - 5-Pin Connector

T14a - 14-Pin Connector

T36 - 36-Pin Connector

(B350) - Plus Connection 1 (87a) (in main wiring harness)


- Location: In wiring circuit between main wiring harness and J17 - Fuel Pump (FP) Relay / J643 - Fuel Primer Relay

(B379) - Brake Wear Indicator Connection 1 (in main wiring harness)


- Location: In main wiring harness between wiring circuits for power supply (SC) and connector T28 at left A-pillar

(D136) - Plus Connection 2 (15a (in engine compartment wiring harness)


- Location: In engine wiring harness between wiring circuits for N32 - Cylinder 3 Fuel Injector and N33 - Cylinder 4 Fuel Injector

Previous Diagram 150/18 (Tracks 225-238)

Next Diagram 150/20 (Tracks 253-266)