Diagram 65/32 (Tracks 421-434)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G299 - Intake Air Temperature (IAT) Sensor 2

J220 - Motronic Engine Control Module

J299 - Secondary Air Injection (AIR) Pump Relay

J519 - Vehicle Electrical System Control Module Locations Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Locations

SB23 - Fuse 23 (on fuse panel B)

T3d - 3-Pin Connector

T14a - 14-Pin Connector

T40 - 40-Pin Connector

T121 - 121-Pin Connector

V144 - Leak Detection Pump Locations

(D106) - Connection 4 (in engine compartment wiring harness) Location: In wiring circuit between main wiring harness and J220 - Motronic Engine Control Module (ECM)

(E7) - Connection (87a)(in Motronic wiring harness) Location: In wiring circuit between main wiring harness and T14a connection in engine compartment wiring harness

Previous Diagram 65/31 (Tracks 407-420)

Next Diagram 65/33 (Tracks 435-448)