Diagram 144/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Emergency Flasher Button, Back-Up Light Switch, Vehicle Electrical System Control Module, Data Bus On Board Diagnostic Interface, Emergency Flasher Indicator Lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E229 - Emergency Flasher Button

F4 - Back-Up Light Switch Direct Shift Gearbox 02E (DSG)

J386 - Driver Door Control Module Locations

J387 - Front Passenger Door Control Module Locations Central Locking / Anti-Theft Systems

J393 - Comfort System Central Control Module Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J527 - Steering Column Electronic Systems Control Module Locations Locations

J533 - Data Bus On Board Diagnostic Interface Locations Locations

J538 - Fuel Pump (FP) Control Module Locations

J643 - Fuel Primer Relay

K6 - Emergency Flasher Indicator Lamp

T4 - 4-Pin Connector, at K6 and E3

T10v - 10-Pin Connector

T18 - 18-Pin Connector, at J393

T20 - 20-Pin Connector, at J533

T20a - 20-Pin Connector, at J386

T20b - 20-Pin Connector, at J387

T20d - 20-Pin Connector, at J527

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

6) - Engine code CBTA, CBUA, only

7) - Engine code CCTA, CBFA, only

Previous Diagram 144/10 (Tracks 113-126)

Next Diagram 144/12 (Tracks 141-154)