Inner Door Seal

Inner Door Seal

Inner door seals are equipped at the factory with sealant, applied to door flange and then rolled on.

• During removal of the seal, sealant is distributed on interior side of seal and flanks are bent up easily. If the seal is re-installed, the sealing performance and proper seating are no longer guaranteed.

• For this reason, every completely removed seal must be replaced with a "hammer-stroke seal".

• For partially removed seals, seal flanks must be pressed together before installation.

Removing

- Pull off inner door seal from body flange.





Installing

- Align inner door seal with vulcanized point - arrow b - at the height of the lower hinge.

- Start installation of inner door seal in upper radius - arrow a - of door opening.