Roof Rail

Roof Molding

Removing

- Using the Trim Removal Wedge (T10039/1), pry the front and rear roof rail cover - 1 - in the - direction of the arrow -.





- Pull up the front and rear roof rail cover - 1 - in - direction of arrow A - and press in - direction of arrow B -.





- Remove the roof rail cover - 1 -.

- Remove the bolt - 3 - on the front and rear roof rail mount - 2 - (20 Nm).

- Remove the center cover - 1 - from the roof rail - 3 - in the - direction of the arrow -.





- Remove the bolt - 2 - on the center roof rail mount - 3 - (20 Nm).

Installing

Installation is performed in the reverse order of removal.

Check for the roof railing cover for damage and replace if necessary.