Instrument Cluster, Replacement

Instrument Cluster, Replacement

Special tools, testers and auxiliary items required

• Vehicle Diagnostic, Testing and Information System (VAS 5051B)

Work procedure "replace instrument cluster" contains the following scope of work:

• If a new instrument cluster is installed in the vehicle, the Instrument Cluster Control Module (J285) must be adjusted to the various equipment characteristics and corresponding version for that country.

• To adapt the integrated Anti-theft immobilize control module (J362) with the Engine Control Module (J623) (ECM), it is necessary to save the data from the engine control module in the replacement instrument cluster.

• Also, all ignition keys must be adapted after installation of a new instrument cluster.

Procedure

- Connect the (VAS 5051B).

- Select "Guided Fault Finding" in the (VAS 5051B).

- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Instrument Cluster

• Instrument cluster functions

• Instrument cluster, adaptation/replacing