Diagram 65/36 (Tracks 477-490)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G40 - Camshaft Position (CMP) Sensor Locations

G61 - Knock Sensor (KS) 1 Locations

G66 - Knock Sensor (KS) 2 Locations

G71 - Manifold Absolute Pressure (MAP) Sensor 2.5L BGP, BGQ, CBTA and CBUA

G247 - Fuel Pressure Sensor Locations

J220 - Motronic Engine Control Module

J519 - Vehicle Electrical System Control Module Locations Locations

T6ak - 6-Pin Connector

T60 - 60-Pin Connector

T121 - 121-Pin Connector

(D101) - Connection 1 (in engine compartment wiring harness) Location: In wiring circuit between engine wiring harness and J220 - Motronic Engine Control Module (ECM)

(D102) - Connection 2 (in engine compartment wiring harness) Location: In wiring circuit between engine compartment wiring harness and J220 - Motronic Engine Control Module (ECM)

(*) - Engine code BPY only

Previous Diagram 65/35 (Tracks 463-476)

Next Diagram 65/37 (Tracks 491-504)