Oil Filter: Service and Repair

Oil Filter Bracket with Attachments Overview






1 Bolt

• 25 Nm

2 Oil Filter Bracket

• Removing:

- Drain the coolant. Refer to => [ Draining and Filling ] Procedures.

- Remove the intake manifold. Refer to => [ Intake Manifold ] Intake Manifold.

- Unscrew connection for thermostat.

- Disconnect the coolant hose from the thermostat housing.

- Drain the oil filter housing, refer to => [ Oil Filter Housing, Draining ] Service and Repair and remove it.

- Loosen the intake manifold support bolts.

- Remove the oil filter bracket, the vent tube => [ (Item 6) Vent Tube ] remains connected.

3 Gasket

• Always replace.

4 Oil Pressure Switch (F1)

• 20 Nm

• 1.4 bar, black

• Checking, refer to => [ Oil Pressure and Switch, Checking ] Testing and Inspection.

5 from the Connecting Pipe

• See => [ (Item 3) Connection ] Air Filter Housing Overview.

6 Vent Tube

• Due to the 4 point lock, only disconnect it when the oil filter bracket is to be removed.

7 Cap

8 Oil Filter Housing

• 25 Nm

• Remove and install using the oil filter wrench (3417).

• Draining, refer to => [ Oil Filter Housing, Draining ] Service and Repair.

9 Seal

• No replacement part, part of the oil filter.

• Insert when lubricated.

• Installed position: Service flag upward.

10 Oil Filter Element

• Drain the oil filter housing before removing, refer to => [ Oil Filter Housing, Draining ] Service and Repair.

11 Gasket

• Always replace.

12 Oil Cooler

• See the note in => [ Lubrication System Overview ] Service and Repair.

• Ensure sufficient clearance to the surrounding components.

• Coolant hose connection diagram. Refer to => [ Coolant Hose Connection Diagram ] [1][2]Cooling System.

13 Bolt

• 25 Nm

14 to the Thermostat Housing

15 Gasket

• Always replace.