Selector Mechanism, from 03.2009: Overview

Overview

CAUTION!
Move the selector lever into the "P" position and set the parking brake before working with the engine running.





1 Shift Cover with Handle

• Do not remove the handle unnecessarily. For emergency release, only the cover must be removed. Refer to => [ Selector Lever, Manual Release ] Selector Lever, Manual Release.

• Pull the button past its pressure point before removing the handle. Secure the button with a cable tie or some suitable wire. This prevents the button from being pushed back into the handle accidentally.

• If the button is pushed in:

- Just before installing, pull out button beyond the pressure point (sense this by touch).

2 Selector Lever and Selector Mechanism with Selector Lever Cable

• With the shift lock solenoid (N110).

• Do not grease the selector lever cable.

• Removing and installing, refer to => [ Selector Lever and Mechanism with Cable, from 03.2009 ] Selector Lever and Mechanism with Cable, from 03.2009.

• Checking, refer to => [ Selector Lever Cable through 02.2009, Checking ] Testing and Inspection.

• Adjusting, refer to => [ Selector Lever Cable, Adjusting ] Adjustments.

3 Screw

• 8 Nm

4 Nut

• 8 Nm

• Quantity: 4

5 Shift Housing

6 Selector Lever Cable

• Cable must not be removed from the selector mechanism and it is replaced together as a single component.

7 Transmission