Subframe Bracket

Subframe Bracket, Replacing

Observe safety precautions.

• In the example, replacement of retaining bracket for subframe is described for left front retaining bracket on this vehicle. Work procedure must be transferred to the other 3 retaining brackets accordingly as necessary.

• Due to the different types of steel and material strength, use only welding equipment approved by Volkswagen AG to perform any service work.

• For a list of welding equipment and body tools approved by Volkswagen AG, refer to => ServiceNet.

Removing






- Separate original joint.

- Remove remaining pieces.






Installing

• Use only welding equipment approved by Volkswagen AG. Refer to => ServiceNet.

Preparing New Parts

Replacement part

• Front retaining bracket for subframe (replacement part designation: retaining bracket mounting frame)

- Drill holes for gas-shielded arc plug weld seam.






Welding

- Fit new part to vehicle standing on alignment bracket set and secure.






- Weld in new part, gas-shielded arc plug weld seam.