2.0L TDI/CR, Engine Code CBEA, Intake Side

Engine Wiring Harness Assembly Overview, 2.0L TDI/CR, Engine Code CBEA, Intake Side





1 Intake Flap Motor (V157) Connector, 5-Pin

2 Throttle Valve Control Module (J338) Connector, 50-Pin

3 Connecting Base

• Note the installation location.

4 Oil Pressure Switch (F1) Connector, 1-Pin

5 Bracket on Oil Filter Bracket

• For the wiring harness.

• Note the installation location.

6 Engine Speed (RPM) Sensor (G28) Connector, 3-Pin

7 Camshaft Position Sensor (G40) Connector, 3-Pin

8 Engine Speed Sensor Bracket on Cylinder Block

• For the wiring harness.

9 EGR Vacuum Regulator Solenoid Valve (N18) Connector, 6-Pin