Temperature Door Adjuster

Temperature Door Adjuster

Removing

- Remove driver side footwell trim

- Remove left footwell air vent --> [ Left Footwell Air Vent ] Instrument Panel Vents

- Unclip cable at adjusting unit for temperature door - 2 -.





- Disengage locking mechanism - 1 - and press adjusting unit for temperature door in direction of - arrow - until it reaches stop.

- Remove adjustment unit.

Installing

Install in reverse order of removal.

• After installing, check temperature door function as follows: Temperature rotary control knob must be able to move easily and without catching from " cold" to "warm" position.