Exhaust System Component Line Routing

Exhaust System Component Line Routing

Routing Lines on the Exhaust Flap Control Module





1 Reduction Catalytic Converter

2 NOx Reduction Catalytic Converter

• Unit with particulate filter --> [ 27 Particle Filter ] Particulate Filter with NOx Absorption Catalytic Converter Assembly Overview (cannot be separated)

3 Direction of Travel

4 Line

• Note installation position

• Ensure seated tightly

5 Cable bracket

6 Heat Shield

• Note installation position

• Replace if damaged

7 Exhaust Flap Control Module (J883) Connector

8 Exhaust Flap Control Module (J883)

Routing Lines for the Oxygen Sensor After Catalytic Converter and Exhaust Gas Temperature Sensor 4





1 Oxygen Sensor After Catalytic Converter (G130)

2 Cable Bracket

3 Exhaust Gas Temperature Sensor 4 (G648)

4 Distance: 100mm

5 Line

• Note installation position

• Ensure seated tightly