Power Distribution Module: Service and Repair

Vehicle Electrical System Control Module

• If Vehicle Electrical System Control Module (J519) is to be replaced, the work procedure to read out the codes stored in the module must always be performed. Refer to --> [ Vehicle Electrical System Control Module, Coding ] Programming and Relearning.

Removing

The vehicle electrical system control module is removed the same way as the relay carrier on it at the left of the instrument panel. Refer to --> [ Relay Carrier on Vehicle Electrical System Control Module ] Relay Carrier on Vehicle Electrical System Control Module.

Installing

The vehicle electrical system control module is installed the same way as the relay carrier on it at the left side of the instrument panel. Refer to --> [ Relay Carrier on Vehicle Electrical System Control Module ] Relay Carrier on Vehicle Electrical System Control Module.