Windshield Wiper Motor, Installing In Wiper Frame

Windshield Wiper System

Windshield Wiper Motor, Installing in Wiper Frame

Procedure

- Insert the Windshield Wiper Motor (V) with the Wiper Motor Control Module (J400) into the wiper frame and secure it with the mounting bolts - arrows -.





- Tighten all threaded connections to the specified values. Refer to --> [ Windshield Washer System Tightening Specifications ] [1][2]Specifications.

- Place the motor crank - 1 - on the Windshield Wiper Motor (V) shaft.

Distance - a - to stop - 2 - must be 3 ± 1 mm.





- Attach the motor crank to the Windshield Wiper Motor (V) shaft using the mounting nut - 3 -.

- Tighten all threaded connections to the specified values. Refer to --> [ Windshield Washer System Tightening Specifications ] [1][2]Specifications.