Glove Compartment: Service and Repair

Storage Compartments, Covers and Trim

Glove Compartment

Removing

- Switch off ignition.

- Remove side instrument panel cover on front passenger side. Refer to --> [ Side Instrument Panel Covers ] Side Instrument Panel Covers.

- Remove center A-pillar trim. Refer to --> [ Center A-Pillar Trim ] Pillar and Side Trim.

- Remove center cover. Refer to --> [ Center Cover ] Center Cover.

- Remove 7 bolts - 1 -, - 2 -, and - 3 - (1.5 Nm).

- Slide glove compartment outward until stops - arrow A -.

- Disengage glove compartment from instrument panel - arrow B -.

- Disconnect wiring harness from lights and contact switch.

- In vehicles with glove compartment cooling, disconnect A/C channel from glove compartment.

- In vehicles with footwell lights, disconnect wiring harness from footwell lights.





Installing

To install, perform the steps used for removal in reverse order.