Mirror Adjustment Switch Module

Lights and Switches in Front Doors and B-Pillar

Mirror Adjustment Switch Module

Driver's side mirror adjustment switch module (depends on equipment):

• Mirror Adjustment Switch (E43)

• Mirror Selector Switch (E48)

• Outside Mirror Heating Switch (E231)

• Mirror Folding Switch (E263)

• Mirror Adjustment Switch Illumination (L78)

The components listed above cannot be replaced separately.

- If faulty, replace the driver's side mirror adjustment switch module.

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Remove the window regulator switch module on the driver's side. Refer to --> [ Window Regulator Switch Module ].

- Unclip switch installation frame from panel.

- Disengage the retaining tabs - arrows - and remove the switch module from the installation frame.





Installing

Install in reverse order of removal.