Crankshaft Main Bearing

MAIN BEARING CAP





Tighten the crankshaft bearing cap bolts in sequence - 1 through 10 - as shown:
Tighten the bolts - 1 through 10 - and - arrows - by hand.
Tighten the bolts - 1 through 10 - to 65 Nm.
Tighten the bolts - 1 through 10 - an additional 90°.
Tighten the bolts - arrows - to 20 Nm.
Tighten the bolts - arrows - an additional 90°.