Clutch Assembly Overview, Sachs

Clutch Assembly Overview, Sachs

• Make sure centering sleeves for engine to transmission are installed in cylinder block, install if necessary.

• If centering sleeves are not installed, shifting difficulties, clutch problems and possibly noise in transmission (loose gear rattling) will occur.





1 Dual-mass flywheel

• Make sure centering pins are in place and seated correctly

• Contact surface for clutch lining must be free of grooves, oil and grease

2 Clutch plate

• Removing and installing --> [ Clutch, Sachs ] Clutch, Sachs.

• Only replace together with pressure plate

• Installed location --> [ Installation Position of Clutch Plate ] Clutch, Sachs

3 Pressure plate

• With adjustment mechanism

• Removing and installing --> [ Clutch, Sachs ] Clutch, Sachs.

• Checking ends of diaphragm spring --> [ Checking Ends of Diaphragm Spring ] Clutch, Sachs

• Check connections of springs and rivets --> [ Check Spring Connections and Rivet Connections ] Clutch, Sachs

• Only replace together with clutch plate

4 Bolt M7, 20 Nm

• Loosen and tighten in diagonal sequence and in stages