Bearing Bracket

Rear Door, Wagon

• The rear doors on the Wagon are different in concept from the rear doors on the Sedan. The outer door panel is not longer removable. The window regulator and the door lock are accessible when the subframe is removed.

Bearing Bracket

Removing

- Remove housing. Refer to --> [ Housing ]. Housing

- Remove door handle. Refer to --> [ Door Handle ]. Door Handle

- Remove subframe. Refer to --> [ Subframe ]. Subframe

- Remove bolt - 3 - from mounting bracket - 1 -.





- Remove mounting bracket - 1 - from door - 2 - in - direction of arrow - inward out of door opening

Installing

- Insert mounting bracket - 1 - in - direction of arrow - into door - 2 -.





Further installation is in reverse order of removal.

- Tightening specification for bolt - 3 -: 4.5 Nm.