Retainer and Power Seat Bracket

Front Seats

Retainer and Power Seat Bracket

• Removal and installation is described for left seat. The same instructions apply for removal and installation for the right seat.

Removing

- Switch off ignition.

- Remove left power seat trim. Refer to --> [ Power Seat Trim, Left ] Power Seat Trim, Left.

- Remove bolts - 1 - (3.5 Nm) and remove bracket - 2 - from seat frame.

- Remove two bolts - 3 - (3.5 Nm) and remove bracket - 4 - and spacer pipe - 5 - from seat frame.





Installing

To install, perform the steps used for removal in reverse order.