Diagram 1/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Front Hood Switch, Wiper Motor Control Module,Vehicle Electrical System Control Module, Dual Washer Pump Relay 2, Driver Wind shield Wiper Motor, Left Washer Nozzle Heater, Right Washer Nozzle Heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F266 - Front Hood Switch Locations

J400 - Wiper Motor Control Module

J519 - Vehicle Electrical System Control Module Control Modules In Interior, From July 2007

J730 - Dual Washer Pump Relay 2 Overview Of Position Of Relays

T2a - Double Connector, at F266

T2u - Double Connector, at Z 21

T2t - Double Connector, at Z20

T4p - 4-Pin Connector, at J 400

V216 - Driver Windshield Wiper Motor

Z20 - Left Washer Nozzle Heater

Z21 - Right Washer Nozzle Heater

(373) - Ground Connection 8 (in main wiring harness)

(B528) - Connection (LIN-Bus) (in main wiring harness)

Previous Diagram 1/12 (Tracks 141-154)

Next Diagram 1/14 (Tracks 169-182)