Bearing Bracket

Front Door

Bearing Bracket

Removing

- Remove housing. Refer to --> [ Housing ]. Housing

- Remove door handle. Refer to --> [ Door Handle ]. Door Handle

- Remove outer door panel. Refer to --> [ Outer Door Panel ] .

- Remove retaining rubber. Refer to - 4 - upward from guide pin.

- Pull bearing bracket - 1 - in - direction of arrow - with guide pin - 2 - out of mounts - 3 -.





Installing

- Slide bearing bracket - 1 - with guide pin - 2 - into mounts - 3 -.

- Secure retaining rubber - 4 - on guide pin and mounting pin on bearing bracket mount.

Further installation is in reverse order of removal.