Manual Lumbar Support

Front Seats

Manual Lumbar Support

• Removal and installation is described for left seat. The same instructions apply for removal and installation for the right seat.

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to --> [ Front Seat ] Front Seat.

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove right trim on seat.

- Remove left trim on seat.

- Remove front seat backrest. Refer to --> [ Front Seat Backrest ] Front Seat Backrest.

- Attach the backrest to the fixture for seat repair (VAS 6136).

- Remove cover and upholstery from front seat backrest. Refer to --> [ Front Seat Backrest Covers and Upholstery ] Front Seat Covers and Upholstery.

- Remove two bolts - 1 - and remove adjusting wheel - 2 - from backrest frame.

- Drill out rivet - 3 -.

- Disengage both upper wires - 4 - of lumbar support from backrest frame.

- Remove lumbar support from backrest frame - 5 -.





Installing

To install, perform the steps used for removal in reverse order.