Diagram 125/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Windshield Wiper/Washer Switch, Windshield and Headlamp Washer Pump Switch, Windshield Washer Fluid Level Sensor, Instrument Cluster Control Module, Vehicle Electrical System Control Module, Steering Column Electronic Systems Control Module, Data Bus On Board Diagnostic Interface, Low Windshield Washer Fluid Level Indicator Lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E22 - Windshield Wiper/Washer Switch

E44 - Windshield and Headlamp Washer Pump Switch

G33 - Windshield Washer Fluid Level Sensor

J285 - Instrument Cluster Control Module Control Modules In Interior, From July 2007

J519 - Vehicle Electrical System Control Module Control Modules In Interior, From July 2007

J527 - Steering Column Electronic Systems Control Module Control Modules In Interior, From July 2007

J533 - Data Bus On Board Diagnostic Interface Control Modules In Interior, From July 2007

K37 - Low Windshield Washer Fluid Level Indicator Lamp

T20 - 20-Pin Connector

T20d - 20-Pin Connector

T36 - 36-Pin Connector

(367) - Ground Connection 2 (in main wiring harness)

(410) - Sensor Ground Connection 1 (in main wiring harness)

(602) - Ground Connection (in left front footwell)

(A201) - Plus Connection 6 (15a)(in instrument panel wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 125/2 (Tracks 1-14)