Engine Assembly - Fastener Tightening Specifications

Fastener Tightening Specifications





Engine Mount





1. = 40 Nm + 90° (1/4 turn) additional turn, replace the bolt

2. = 20 Nm + 90° (1/4 turn) additional turn, replace the bolt

3. = 60 Nm + 90° (1/4 turn) additional turn, replace the bolt

Transmission Mount





A = 40 Nm + 90° (1/4 turn) additional turn, replace the bolt
B = 60 Nm + 90° (1/4 turn) additional turn, replace the bolt

Pendulum Support





• First install the pendulum support to the transmission and then to the subframe.

A Strength category 8.8 = 40 Nm + 90° (1/4 turn) additional turn, replace the bolt
A Strength category 10.9 = 50 Nm + 90° (1/4 turn) additional turn, replace the bolt
B = 100 Nm + 90° (1/4 turn) additional turn, replace the bolt

Removing - first remove bolt - B -, then bolts - A -.

Installing - first install bolts - A -, then bolt - B -.