Temperature Door Release

Temperature Door Release

Removing

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

- Remove heating and ventilation controls --> [ Heating and Ventilation Controls ] Heating and Ventilation Controls

- Reach into center console and disengage locking mechanism - 1 - of Bowden cable sheath - 2 - and remove Bowden cable sheath from mount.





- Disengage ball on Bowden cable - 3 - from operating lever.

- Remove driver side footwell trim

- Unclip Bowden cable at adjusting unit of temperature doors - A - and unclip heating and ventilation unit - B -.





Installing

Install in reverse order of removal, noting the following:

- Ensure Bowden cable is routed under hook - arrow -.





- Check whether temperature knob can be moved easily from " cold" to "warm".