Emergency Flasher Switch

Instrument Panel Lamps and Switches

Emergency Flasher Switch

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Remove the center vent.

- Disconnect connectors - arrows -.





- Disengage retaining tabs - arrows - and remove the Emergency Flasher Switch (E3).





Installing

Install in reverse order of removal.