General Repair Information

General Repair Information

CAUTION!
When disassembling and assembling the vehicle, the drive axles must not hang down loose or reach the stop in the joints by over bending.

• Welding and straightening work on supporting or wheel carrying components of the suspension is not permitted.

• Always replace self locking nuts.

• Always replace corroded bolts/nuts.

• Bonded rubber bushings can only be turned to a limited extent. Therefore, only tighten bolts on components with bonded rubber bushings when the wheel bearing housing is lifted to curb weight position. Refer to --> [ Wheel Bearing Housing, Lifting to Curb Weight Position ] Wheel Bearing Housing, Lifting to Curb Weight Position.