Headlamp Washer System

Headlamp Washer System

For every fifth activation of windshield washer system, headlamps are also washed if windshield wiper lever is pulled toward steering wheel for at least 1.5 seconds - as long as low beam or high beam headlamps are switched on.

The "active time" of headlamp washer system can be adjusted variably between 0 seconds and 12.75 seconds. Refer to --> [ Headlamp Washer System, Adapting ] Testing and Inspection.

After assembly work or when first operating headlamp washer system, it must be ventilated to ensure proper function of lift cylinders and spray nozzles. Refer to --> [ Headlamp Washer System, Bleeding ] Procedures.

DTC recognition and display

The Vehicle Electrical System Control Module (J519) is equipped with OBD.

Use the "Guided Fault Finding" function on the for fault finding.

For additional information, refer to --> Operating Instructions.