Motor Support

Panorama Sunroof

Motor Support

Removing

- Remove the assembly frame from the vehicle. Refer to --> [ Assembly Frame ] Assembly Frame.

- Remove sunroof motor. Refer to --> [ Sun Shade Motor ] Sun Shade Motor.

- Remove the bolts - arrows - (2 Nm).

- Remove the cable covers - 1 and 2 -.





3 - Front Motor Support

4 - Front Part

- Remove the cable ends - 1 - from the motor support - 2 -.

- Pry the motor support - 1 - out using a suitable screwdriver - 4 - from the front part - 2 -.





Installing

Installation is performed in the reverse order of removal.

• Do not lubricate the sun shade slide cables and motor support.

- Install the sunroof motor. Refer to --> [ Sunroof Glass Panel Drive Motor ] Sunroof Glass Panel Drive Motor.

- Install the assembly frame. Refer to --> [ Assembly Frame ] Assembly Frame.

- After completing all the work, perform a sun shade motor adaptation. Refer to --> [ Panorama Sunroof, Adapting ] Panorama Sunroof, Adapting.