Sun Shade Motor

Panorama Sunroof

Sun Shade Motor

Removing

- Remove the headlines..

- Disconnect the electrical connector - 1 - on the sun shade motor - 2 -.





- Remove the bolts - arrow - from the sun shade motor - 2 -.

- Remove the sun shade motor - 2 -.

Installing

Installation is performed in the reverse order of removal.

- Prior to installing the motor, make sure the sun shade is parallel by measuring - dimension a - between the shade arch - 1 - and the shade cartridge - 2 -.





Tightening Specification: Screws - 3.5 Nm

- After completing all the work, perform a sun shade motor adaptation. Refer to --> [ Panorama Sunroof, Adapting ] Panorama Sunroof, Adapting.