Power Seat Height Adjustment Unit

Front Seats

Power Seat Height Adjustment Unit

• Removal and installation of seat height adjuster is described for left backrest frame. Removal and installation of the right seat height adjuster is performed in the same way.

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to --> [ Front Seat ] Front Seat.

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove right trim on seat.

- Remove left power seat trim. Refer to --> [ Power Seat Trim, Left ] Power Seat Trim, Left.

- Remove retainer and power seat bracket. Refer to --> [ Retainer and Power Seat Bracket ] Retainer and Power Seat Bracket.

- If present, remove the front seat drawer mount. Refer to --> [ Seat Drawer Mount ] Seat Drawer Mount.

- Remove front seat backrest. Refer to --> [ Front Seat Backrest ] Front Seat Backrest.

- Remove the cover and upholstery from the front seat backrests. Refer to --> [ Front Seat Cushion, Cover and Upholstery ] Front Seat Covers and Upholstery

- Remove screw - 1 - in rear area of seat base.

• Screw - 1 - in installation position points from inside toward outside.

- Disconnect wiring harness - 2 - from height adjuster - 3 -.

- Remove the two bolts - 4 -.

- Remove height adjuster - 3 - from mounts in seat base.





Installing

- To install, perform the steps used for removal in reverse order.