Diagram 22/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fuel Level Sensor, Transfer Fuel Pump (FP), Outside Air Temperature Sensor, Engine Coolant Level (ECL) Sensor, Windshield Washer Fluid Level Sensor, Instrument Cluster Control Module, Instrument Cluster, Front Hood Open Warning Lamp, Tire Pressure Monitoring Display Indicator Lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G - Fuel Level Sensor Overview Of Position Of Relays

G1 - Fuel Gauge

G3 - Engine Coolant Temperature (ECT) Gauge

G6 - Transfer Fuel Pump (FP) [1][2]Diagrams Locations

G17 - Outside Air Temperature Sensor

G32 - Engine Coolant Level (ECL) Sensor [1][2]Coolant Level Sensor Locations

G33 - Windshield Washer Fluid Level Sensor

H3 - Warning Buzzer and Tone Locations

J17 - Fuel Pump (FP) Relay Overview Of Position Of Relays

J285 - Instrument Cluster Control Module Control Modules In Interior, From July 2007

J519 - Vehicle Electrical System Control Module Control Modules In Interior, From July 2007

J643 - Fuel Primer Relay

K - Instrument Cluster

K171 - Front Hood Open Warning Lamp

K220 - Tire Pressure Monitoring Display Indicator Lamp

T2z - Double Connector, on G17

T5b - 5-Pin Connector, on G

T10q - 10-Pin Connector

T36 - 36-Pin Connector, on J285

(410) - Sensor Ground Connection 1 (in main wiring harness)

(B350) - Plus Connection 1 (87a) (in main wiring harness)

Previous Diagram 22/5 (Tracks 43-56)

Next Diagram 22/7 (Tracks 71-84)