Cylinder Head Assembly: Specifications

Fastener Tightening Specifications





• 1 Always replace

Cylinder Head Cover Bolt Tightening Sequence and Specification





- Tighten the cylinder head cover bolts - 1 through 16 - in the sequence shown to 10 Nm.

Cylinder Head Bolt Tightening Sequence and Specification





- Then tighten the cylinder head bolts - 1 through 12 - in the sequence shown as follows:





- Then tighten the bolts - 13 - to 10 Nm.

Guide Frame Bolt Tightening Sequence and Specification





- Tighten the NEW bolts - 1 through 7 - to 8 Nm in the sequence shown.

- After that, continue to tighten all bolts 90° (1/ 4 rotation).