Engine Lubrication: Service and Repair

Lubrication System Components Overview





1 Cylinder block

2 Oil pump drive chain

• Beginning with Model Year (MY) 2008 the roller chain has been changed to a tooth chain.

3 Bolt, 20 Nm + 90° (1/4 turn) additional turn

• Always replace.

4 Bolt, 25 Nm

5 Oil filter bracket with attachments

• Assembly overview, refer to --> [ Oil Filter Bracket with Attachments Overview ] Service and Repair.

6 Oil pump sprocket

• Removing and installing, refer to one of the following:

• Engine codes BGP, BGQ and BTK, refer to --> [ Oil Pump, Engine Codes BGP, BGQ and BTK ] .

• Engine codes CBTA and CBUA, refer to --> [ Oil Pump, Engine Codes CBTA and CBUA ] Oil Pump, Engine Codes CBTA and CBUA.

• Lettering points outward.

• With anti-twist mechanism.

7 Oil pump

• Removing and installing, refer to one of the following:

• Engine codes BGP, BGQ and BTK, refer to --> [ Oil Pump, Engine Codes BGP, BGQ and BTK ] .

• Engine codes CBTA and CBUA, refer to --> [ Oil Pump, Engine Codes CBTA and CBUA ] Oil Pump, Engine Codes CBTA and CBUA.

8 Bolt, 25 Nm

9 Oil dipstick

• Oil level must not be above the max. mark!

10 Retaining ring

• Clipped in on the intake manifold.

11 Oil dipstick guide tube

12 Intake manifold support

• For engines with Secondary Air Injection (AIR) system only.

13 Bolt, 25 Nm

14 O-ring

• Always replace.

15 Seal

• Always replace.

16 Bracket

17 Bolt, 10 Nm

18 Lower oil pan

• Removing and installing, refer to --> [ Lower Oil Pan ] Lower Oil Pan.

19 Bolt, 10 Nm

20 Oil pan drain plug, 30 Nm

• Always replace.

21 Oil intake pipe bracket bolt, 10 Nm

22 Oil intake pipe

23 Bolt, 25 Nm

24 Upper oil pan

• Removing and installing, refer to --> [ Upper Oil Pan ] Upper Oil Pan.