Headlamps

Headlamps

• It is not necessary to disconnect the battery.

• The following illustrations depict removal and installation of left headlamp.

• If one headlamp is removed, it must always be adjusted after installation.

• If an HID headlamp is removed, perform the basic setting after installation.

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

Removing

- Release and disconnect electrical connection - arrow -.





- Remove the front bumper.

- Remove screws - arrow - at top of headlamp.





- Remove mounting bolt - arrow - at lower left of headlamp.





- Remove mounting bolt - arrow - at lower right of headlamp.





Installing

Install in reverse order of removal, noting the following:

- Tighten mounting bolts at headlamp to specified tightening torque. Refer to --> [ Fastener Tightening Specifications ] [1][2]Lighting and Horns.

- Check installation position of headlamp for uniform gap dimensions.

If headlamp has an uneven gap dimension to the body, installation position must be corrected. Refer to --> [ Headlamp Installation Position, Correcting ] Headlamp Installation Position, Correcting.

- Check headlamp for function.

- Check headlamp adjustment and adjust the headlamps.