Rear Axle Camber, Adjusting

Rear Axle Camber, Adjusting

Special tools, testers and auxiliary items required

• Shock absorber set (T10001)

• Insertion tool 18 mm (T10179)

- Loosen the nut - A - for the upper transverse link.





- Set the camber by turning eccentric bolt - B - using the (T10001) - 1 -.





• The maximum adjustment range is 90 degrees to the left or right of center position.

- Tighten the nut - A -.





- To do so, use (T10179).





- After tightening the nut - A -, check the camber value again.

Tightening Specifications