Transmission Position Sensor/Switch: Adjustments

Multi-Function Transmission Range Switch, Adjusting

Special tools, testers and auxiliary items required

• Setting gauge (T10173)





- Move selector lever to position "N".

- Do not kink selector lever cable.

Adjustment Prerequisites

• Selector lever cable is disconnected from selector shaft lever.

• Selector shaft is set to "N" position.

• Securing bolts for Multi-Function Transmission Range (TR) Switch (F125) have been loosened.

• Selector shaft lever has been removed.

- Place setting gauge on selector shaft - 2 - and turn Multi-Function Transmission Range (TR) Switch - 1 - until setting gauge engages in lug on Multi-Function Transmission Range (TR) Switch connector.





- Secure setting gauge on selector shaft - 2 - with bolt - 3 -.

- Tighten bolts - arrows - to 6 Nm.

- Remove setting gauge.

- Continue installation in reverse order of removal.