Shifter Knob and Cover
Shifter Knob and Cover
1 Shift lever knob
• With boot
• The shifter knob and boot cannot be separated from each other.
• Always replace together
• Removing and installing --> [ Boot with Shifter Knob and Noise Insulation ] Boot with Shifter Knob and Noise Insulation
2 Boot
• Removing and installing --> [ Boot with Shifter Knob and Noise Insulation ] Boot with Shifter Knob and Noise Insulation
• Always replace together
3 Clamp
• For securing the shifter knob to the shift lever
• Secure with Hose Clamp Pliers (V.A.G 1275) on shifter knob --> [ 1 Shift lever knob ]
• Always replace
4 Noise insulation
• Not equipped on all vehicles
• Arrow on noise insulation points in direction of travel
• Catches are arranged in varying intervals
• Therefore, installation is only possible in one position