Front Backrest Cover and Cushion From 05.2003

Front Cover and Cushion

Front Backrest Cover and Cushion from 05.2003

• Due to equipment variations, small deviations must be considered during removal and installation.

Removal





- Remove seat.

- Remove the headrest.

- Remove backrest. Refer to => [ Front Backrest Assembly Overview ] Front Seats Overview.

- Separate beading strip - 1 - for cover - 2 - using a screwdriver - arrows -.

- Unhook tension wire - 1 - - arrows -.





- Pry off operating mechanism - 1 - of backrest release and securing clip - 2 -, unclip upper trim - 3 - and remove upward.





- Pry off lumbar support adjusting wheel - 4 -.

• Always replace securing clip - 2 -.

- Remove headrest guide.





- Remove piping - arrow - from left and right backrest frame.





- Cut through upholstery clips - arrows -.





- Remove piping - 1 - from clips - 2 -.





- Disengage tension wire.

- Remove backrest cover upward.

Installation

To install, perform the steps used in removal in reverse order.