Diagram 652/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake Pressure Sensor 1, ESP Sensor Unit, ABS Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Light Switch ABS - Electrical and Electronic Component Locations - EDL/ASR

G200 - Transverse Acceleration Sensor ABS - Electrical and Electronic Component Locations - EDL/ASR/ESP

G201 - Brake Pressure Sensor 1 ABS - Electrical and Electronic Component Locations - EDL/ASR/ESP

G202 - Rotation Rate Sensor ABS - Electrical and Electronic Component Locations - EDL/ASR/ESP

G419 - ESP Sensor Unit

J104 - ABS Control Module ABS - Electrical and Electronic Component Locations - EDL/ASR

J220 - Motronic Engine Control Module (ECM) Locations

J248 - Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) Locations

N225 - Driving Dynamics Regulation Switch Valve 1

N226 - Driving Dynamics Regulation Switch Valve 2

N227 - Driving Dynamics Regulation High Pressure Switch Valve 1

N228 - Driving Dynamics Regulation High Pressure Switch Valve 2

T4y - 4-Pin Connector on F

T16 - 16-Pin Connector, under instrument panel, left, Data Link Connector (DLC)

T47a - 47-Pin Connector, on ABS control module

T94 - 94-Pin Connector

T121 - 4-Pin Connector

(A76) - K-Diagnosis Wire Connection (in instrument panel wiring harness)

(B131) - Connection (54) (in interior wiring harness)

* - Only models with engine code BPR and BPS

** - Only models with engine code BEW 1)

1) - Through June 2007

2) - From July 2007

Previous Diagram 652/4 (Tracks 29-42)

Next Diagram 652/6 (Tracks 57-70)