Checking Turn Signal and Emergency Flasher System

Checking turn signal and emergency flasher system

Checking turn signal and emergency flasher system




Before starting troubleshooting, battery negative terminal (-) must be securely tightened.




Prerequisite:


• S2 - Fuse 2 (10A) in fuse panel OK !

• S239 - Fuse 39 (15A) in fuse panel OK !

• All turn signal bulbs OK !

Attention!
DO NOT damage, enlarge or bend connector terminals or cavities by forcing probes into them when performing electrical checks. Always use connector test kit VW 1594 to make the necessary electrical connections.


Preparation:


- Switch OFF ignition and all electrical consumers.
- Remove turn signal switch
- Remove turn signal switch trim