Horn: Service and Repair

Horn

=> [ High and Low Tone Horns ]

High and Low Tone Horns

The High Tone Horn (H2)/Low Tone Horn (H7) are attached to the longitudinal member on the left side.

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

Removing

- Remove the noise insulation.

- Disconnect connectors - 2 - and - 5 -.





- Remove the nuts - 1 - on the High Tone Horn (H2) - 3 - and - 6 - and on the Low Tone Horn (H7) - 4 - and then remove the horns.

Installing

Install in reverse order of removal, noting the following:

- Tighten the nuts to 13 Nm.

• When installing, position the horns so that they are not touching any surrounding components.